Soft plugging agent

Product introduction

Ntp-cc 502 A / B Soft plugging agent is a kind of polymer material cured in the air. It is designed to protect the power cabinet from moisture. The soft plugging agent uses new technology and can be cured well without heating. It is divided into two components: A and B. The part A and part B should be mixed by a ratio of 100:10 (weight ratio or volume ratio).The product will solidify within a certain time and become an elastic buffer material.

Product specifications

11kg / set A: 10kg / barrel B: 1kg / bottle

Product Characteristics

1. It is resistant to moisture, dirt and other atmospheric components.

2. It can reduce mechanical stress and tension caused by machine, thermal shock and vibration.

3. It is easy to repair.

4. It has good high-frequency electrical performance.

5. It has good bonding performance.

6. It can maintain mechanical and electrical properties between - 50-150 ℃.

Scope of application

1. It can make moisture proofing and seal at the bottom of electrical cabinet.

2. It can seal for wall pipeline.

Usage

Firstly,block the gap with glue；

Next, mix the part A and part B by a ratio of 100:10 (weight ratio or volume ratio) evenly;

And then pump vacuum to remove bubbles;

Finally pour it on the products you need. If the products are too large, it is necessary to pour a little in several times, and then cured according to the corresponding conditions.

Note: if you have any questions, please contact us.